Must Have Parts & Accessories
>
Automatic Bilge Pump Control
JetSki Solutions uses only the highest grade materials for each application in our remanufacturing processes.
Many of the materials we use are manufactured to our stringent expectations.
|
||||||||||
|
Tired of replacing your bilge pump switch every year? Do you forget the bilge is on and leave it running? Solve the control problem with our Automatic pump control kit. The operation is simple. A Honeywell military-grade waterproof three-position toggle switch selects off (center), auto (up), or override on (down). In the auto position, a special automotive and marine approved 10 amp pressure switch senses water pressure on the cooling water hose from the pump. When the craft is started in the water, the switch operates the bilge pump. The pump operates as long as the craft is in use. Turn the engine off, the pump turns off. If you need to operate the pump with the craft out of water, simply switch to "override on". This kit is easy to install and requires very little extra work or wiring as compared to an 'on/off switch only' setup. This kit will work on any craft with 3/8" water line and come complete with everything needed except the bilge pumps. All of the components are top quality. Rule 500 bilge pumps are also available. |
||||||||||
|
||||||||||
