Jet Ski Solutions - Customer Feedback & Testimonials

I recently swapped the motor on my x2 to a 750. The ebox I had was a mess and I couldnt get my ski to turn over. Luckily I found these guys and sent them my stuff. They informed me my stator was bad and ended up replacing it. They also did a full rebuild on all my electronics. Their work was above and beyond what I expected. Super clean work and attention detail. I really appreciate all the help and the excellent job you did in fixing my stuff. Thanks again, highly recommend!

Jeremy B, Folsom, CA, Sep 23rd 2022

JetSki solutions recently restored my JS 550 EBOX and stator and did a excellent job. The quality of the restoration was better then when it came new from kawasaki. I would highly recommend them for any PWC electrical restorations.

John A, Sep 26th 2020

Did not get to write in a Testimonial last year.Something came up and didn't get to ride it last year. But we did get to ride it this week and boy it rides great. We had upgraded our 650ssx stand up with an 750sts engine. We had talked with John if was okay to use the stater from the 650 he said you could use it but the 750 stater was way better stater. John said he could rewire the 750 E-box to work in our 650 ski. So we sent him the 750 E-box just the way they tell you to .It got there in got there in a day. John contacted after he looked at it and asked me what did I want do. Asked him if he could go though the hole thing and put in what he thought it needed. John took care it. Everything we talked about john did and then some.The turn around time is not that long. When we got our E-box back and opened up the box the product that came back from the people at JetSki Solutions.It blew us away. The work and the detail that was put in the box was amazing.You Guys are great at what you do. It plugged up Beautiful just a little work on our part. Looks like it came with the ski from the factory. Thank you again for your great work. Need to see if you have a sticker we can put on the box. We had the hood opened and a couple of skiers looked inside and asked us were we got the e-box from. Smiled and told them JetSki Solutions. You Guys take care.

John D, Tracy, CA, Jul 3rd 2020

Had my e box rebuilt for my FX1 recently. Even during this crazy pandemic it was done in a timely fashion and correctly. Installed it and fired the first try. I want to thank you for everything once again, I will be coming back for all my jet ski needs. Great job!

Joe B, Sacramento, CA, Jun 18th 2020

Ordered my primer kit , shipped Saturday had it Monday. Installed in less than an hour worked great.

Randy M, Butler, IN, Apr 27th 2020

My neighbor had a PWC that was submerged and then sat for 3 years. They thought it was a lost cause and were going to junk it. I pulled the Rusty and corroded ignition box and it to Jet ski solutions. In no time it was back like new and the PWC runs great. Excellent quality and service.

Frank M, Overland Park, KS, Apr 20th 2020

I'm absolutely happy that I went with these guys to help me fix my Yamaha powered jet rib. Quick turn around, excellent conversation. Thank you!

Thomas P, FL, Mar 3rd 2020

Cant say enough positive comments. Fast, professional, trustworthy, great communication.

Damian G, MI, Feb 1st 2020

What an excellent experience. I submitted my old stator and it came back like a brand new stator. Jet ski solutions were fast and economical and very easy to work with. I am sending them another one for testing and repair! I wish all companies were this good!

Eric P, Sep 17th 2019

John and the team not only do high quality work at a fair price, they will answer any questions you have. My JS550 stator came back looking better than factory new, and then the charge coil promptly burnt up. The team sent me all the ohm specs for other components that might have been the culprit. Turns out it was a bad rectifier and we got my ski back on the water within a week of sending back for a rewinding. These guys are the real deal and have a customer as long as they are in business!

Justin C, Aug 22nd 2019

I bought the ski of my childhood dreams this winter, a 1989 Kawasaki 650sx stand up jet ski. I had a blast riding it this spring and then it died. I'm thankful that Jetski Solutions is around and still supporting these older jet skis. I sent a nasty and rust filled box that had 30 years of abuse. They sent me back a beautiful piece of art and after an hour of connecting things back together I headed to the lake. BTW, I love they they only use original and high quality parts and replaced a new but cheap relay I tried to install. The ski ran better than ever and had way more response and power. I'm betting I'll get another 30 years from the electrical box (I hope I'll still be riding then)

Robert M, Montpelier, VA, Aug 22nd 2019

Id like to add from my previous post, that I would definitely recommend replacing your stock CDI box with the Zeeltronic system. Such a sweet addition with the fuse hole access switch to change the curves! And comes with a programmable cable to download from their site! Happy riding!

Mark H, South Charleston, WV, Aug 19th 2019

Several weeks ago, my 2003 SXR fried the wiring from the stator to the ebox and even burned the voltage regulator and CDI some. I was devastated, because this ski was all stock, mint condition, and was always maintenance and trouble free for me. Sadly, I didnt learn about John and JSS until after I had bought some Chinese aftermarket components. (CDI, stator, voltage regulator) Let me just say, with these off brand components, the ski ran God awful. Almost like it was running on one cylinder. I checked everything over and over. I could not get it to run any better. Then, after researching more forums, I heard about John and JSS. He was beyond helpful to me. I sent the entire ebox and stator to him. I also opted for the Zeeltronic system as well. Total turnaround time was about 3 weeks because they were slammed with restorations. Got the finished products back and installed them, and I was blown away. Wow. My SXR was not only back, but back with a vengeance! It ran 10 times better than I remember it. I cannot thank John and JSS enough. Guys and gals, if you need work done on your craft, do not hesitate to contact these awesome folks. I wish I had found them in the beginning, before my costly mistake online with knock off aftermarket.

Mark H, South Charleston, WV, Aug 19th 2019

Have used them twice, one to rebuild a startstop switch and the other to add new plug wires to coil. Turnaround time had been excellent each time. Definitely would use them again without hesitation.

David C, Galwayi, NY, Jul 18th 2018

I want to give a huge shout out to my main electrical guy John, over at JetSki solutions. John has always done A plus work for me, every single wire in my JetSki has been re-done by him, and my most recent story is, my start and stop switch housing (which is also a billet one, its not a stock housing) I had a short In the green starter button and the reason that happened is because Im all about the bling and I have to have that billet start and stop switch. so long story short John made sure he made that switch housing work for me. so he figured out the problem with my start and stop box fixed it all up and sent it back, didnt even ask me for a dime I only had to pay to ship it back. So he basically warrantee his work that he did for me because he originally built that switch box for me and he originally told me that those switch box arent always the greatest because of how the wire sits inside of them, but he still came through and did what I asked for! Thank you so much John at JetSki solutions you have my business for life and I will always continue to send guys your way. And for the record his prices might be a bit pricey but its worth every penny! ever since I put one of his reworked eboxs in my ski Ive never had a problem again! Well worth the money! John you have my business forever thanks so much for everything youve done for me... If you havent had your JetSki electronics serviced by Jon then you dont know what youre missing by far one of the best things you can ever do to your ski is have your e-box serviced by the legend

Justin L, FL, Jul 4th 2018

Hands down the best guys on the internet for anything jet ski related. I recently purchased a whole ebox from them for a 650sx after chasing an electrical gremlin for about 3 months. And all I can say is wow! Worth every penny. Looks awesome and functions even better. Ski has never ran this smooth! Any more problems I have or anything I need redone will be sent to these guys! Shipping is fast and will typically respond very quickly. Beyond happy

Christian R, Jul 3rd 2018

sent in my stator for restoration for my 87 js 550. i couldnt believe what it came back as!! the ski fired right up. great job!!!

TJ O, IL, May 8th 2017

I have a 1985 and a 1990 550 and I sent in my stator for my 85' and the process is fast. I am very satisfied with the results and will be sending in my 90' in as soon as I remove it from my engine. Both were having charging issues and I hope when I fire them up this spring I wont have any issues. Thanks!!

Dane K, Griffith, IN, Apr 13th 2017

you sold the stuff to my brother, Rich Carruba, so don't be confused I just returned from an early ride. I have a 1996 RN Superjet, bought new, and used hard every season. The ski is mostly stock. Over time, it began to miss, gradually getting worse when it warmed up. We rebuilt the carbs, but the problems didn't go away. The 20 year old harness was sent, tested, and renewed. The diagnosis was that all coilsstators were fine, but the spark plug wires were long dead. The new harness arrived, all beautiful wiring and well assembled. Ski fired up, and ran hard to the limiter-no misses or bogs. Nicely done and well worth the money.

Casey R, Croton, NY, Apr 9th 2017

I needed 2 new kill switch assemblies for my 2 jet skis. New they are around $180 each. Sent my old ones to Jet Ski solutions and had them completely rebuilt for $75 each. Did an excellent job, had great communication and the turnaround time was super fast! Thanks for saving me a lot of money!

Brad S, Mar 22nd 2017